| Possibility of manual or fully automatic control and measurement of pressure release in the test line |
| Constant flow / variable flow / cyclic tests |
| Constant flow: only 0.5 liters of water are required for testing |
| Variable flow: Reynolds number requires a 3 L sample and a 90 second test; range of Reynolds numbers from 6000 to 80,000 |
| Variable flow testing saves about a month compared to other testing methods |
| Stainless steel pipe, ID = 5 mm x 3.5 m (ID = 3 mm or other pipe dimensions on request) |
| Turbulent flow with maximum kinematic viscosity 45 cSt (ID= 5 mm) |
| Maximum Reynolds number 80,000 (lD = 5 mm, 1 cSt) |
| Small required sample volume: from 0.5 l to 3 l |
| Temperature range: -10 to +80 °C (+14 to +176 °F) |
| Maximum pressure 35 bar (3.5 MPa, 507 psi) |
| Chemically immune to most oils/fuels (stainless steel, PEEK, PTFE, SCF) |
| Industrial control equipment "SPS", software for automatic equipment control |
| Panel computer, 15“ LCD monitor, Windows XP, equipment for processing analog and digital data |
| TR-Control software, including full automation of measurements, data processing / visualization, the ability to conduct 24-hour continuous tests, the ability to export data to Excel |
| Software: TR_EvaluationTool allows you to calculate the effectiveness of ATP and export data to Excel |
| The entire measuring stand is very compact and built into an aluminum casing |
| Noise suppression system, oil re-cooling heat exchanger |
| Spare parts for 2 years service life |
| Required voltage 380 V, current 16 A, hydraulic booster, 6 bar (0.6 MPa), 1 l/min |
